Four Reasons You're Lacking Hot Water

If you find your hot water tank is having trouble dispensing hot water throughout your home, then there are a few reasons for this. 

High Water Usage. The first is the most common reason for your lack of hot water, the tank has emptied. If you are running multiple things at once that require hot water use, then you’re bound to run out of the water that has been heated. Your tank needs time to refill and heat the new water coming through. Avoid running dishwashers, clothing washers, and multiple people taking baths and showers at the same time to prevent this from happening. Your home could also have a hot water tank that is too small  for the size of your home, which can also lead to running out of hot water.  If you find your home frequently has this problem, consider installing a tankless water heater that can help with this problem.

Check your Thermostat. If you feel your water isn’t getting hot enough, check your hot water heater’s thermostat. This controls the temperature of the water in the tank, so you can simply turn it up to increase the temperature. Or vice versa, if you think the water is too hot. Remember, water scalds at 140 degrees, so don’t set it any higher than that. Call us at Tony’s Plumbing for a malfunctioning thermostat and we will inspect your hot water tank and thermostat to make sure everything is functioning properly.

Sediment in your Tank. If there is sediment in the hot water tank, it will stop hot water from coming out of the tank. Minerals can build up in the bottom of the tank (especially if you have hard water), which will stop the water from being heated to temperature. If there is rust in the water, then that is a sign of corrosion, and you’ll need to update your hot water tank. Remember to drain your tank once a year to clear out any sediment. If you have rust, give us a call at Tony’s Plumbing to help fix this problem.

Check the Dip Tube. There is a plastic tube at the top of the tank that goes all the way to the bottom. This is where the cold water enters the tank. The hot water is at the top, and the tube makes sure the cold water goes to the bottom, so the hot water at the top is dispensed to your home first. If the tube breaks or disconnects, then the cold water will mix with the hot at the top of the tank and cool it down. You can call a plumber for this repair.

Once you’ve established the problem the fix can be simple or a little more complex. Give us a call at Tony’s Plumbing with any questions, upgrades, or repairs you might need, and we’ll get your home’s water all warmed up.

---